1. Conditions for use of the blocking wheel hydraulic station
The rotary kiln supporting wheel should be installed parallel to the center line of the kiln body. The kiln body is placed at an angle and has a tendency to slide under its own weight. A hydraulic thrust blocking wheel hydraulic station is used to make the kiln The body is forced to move up and down in a controlled manner at the expected speed (generally about /), thereby effectively ensuring uniform contact and wear between the tire belt and the supporting wheel, and saving the workload of adjusting the supporting wheel.
The normal up and down stroke of the hydraulic gear wheel is ±. When the up and down stroke is reached, an alarm signal should be issued. When the up and down stroke reaches the limit stroke (±3), the power supply to the main motor should be stopped immediately. . It is allowed to make a small change of ±- to the above control stroke by adjusting the position of the limit switch.
When purchasing a gear wheel hydraulic station, come to Qidong Sage with first-class quality
When purchasing a gear wheel hydraulic station, come to Qidong Sage for its first-class quality